dji MATRICE 350 RTK

MATRICE 350 RTK User Manual
26
©
2023 DJI All Rights Reserved.
Flight Restrictions in GEO Zones
The following section describes in detail the ight restrictions for the above mentioned GEO
Zones.
GEO Zone Flight Restriction Scenario
Restricted
Zones (Red)
UAVs are prohibited from
ying in Restricted Zones. If
you have obtained permission
to y in a Restricted Zone,
please visit https://y-safe.dji.
com or contact ysafe@dji.
com to unlock the zone.
Takeo: the aircraft motors cannot be
started in Restricted Zones.
In Flight: when the aircraft ies inside a
Restricted Zone, a 100-second countdown
will commence in DJI Pilot 2. When the
countdown is nished, the aircraft will land
immediately in semi-automatic descent
mode and turn o its motors after landing.
In Flight: when the aircraft approaches the
boundary of a Restricted Zone, the aircraft
will automatically decelerate and hover.
Authorization
Zones (Blue)
The aircraft will not be able to
take o in an Authorization
Zone unless it obtains a
permission to y in the area.
Takeo: the aircraft motors cannot be
started in Authorization Zones. To y in an
Authorization Zone, the user is required
to submit an unlocking request registered
with a DJI-veried phone number.
In Flight: when the aircraft ies inside
an Authorization Zone, a100-second
countdown will commence in DJI Pilot 2.
When the countdown is nished, the aircraft
will land immediately in semi-automatic
descent mode and turn o its motors after
landing.
Warning
Zones
(Yellow)
A warning will be displayed
when the aircraft ies inside a
Warning Zone.
The aircraft can y in the zone but the user
is required to understand the warning.
Enhanced
Warning
Zones
(Orange)
When the aircraft ies in an
Enhanced Warning Zone, a
warning will be displayed
prompting the user to conrm
the ight path.
The aircraft can continue to y once the
warning is conrmed.