dji MATRICE 350 RTK

MATRICE 350 RTK User Manual
48
©
2023 DJI All Rights Reserved.
Mounting the Strap and Bracket Kit
A strap and bracket (excluded) can be mounted onto the remote controller in the following
steps.
1. Mount the bracket on the remote controller with two screws.
2. Unfold the two handles.
3. Wear the strap, and attach the strap hooks to the handle holes.
• After use, hold the remote controller with one hand, unlock the strap hooks with the
other hand to remove the remote controller, and then take o the strap.
Adjusting the Antennas
Lift and adjust the antennas. The strength of the remote controller signal is affected by the
position of the antennas.
Adjust the direction of the external antennas and make sure their at side is facing the aircraft,
so that the controller and aircraft are within the optimal transmission zone.