dji MATRICE 350 RTK

MATRICE 350 RTK User Manual
©
2023 DJI All Rights Reserved.
87
low battery warning thresholds, and number of days required for self-discharge.
f. Gimbal Settings: include gimbal pitch and pan settings, and gimbal auto calibration.
g. RTK Settings: include the RTK positioning function, RTK service type, and their
corresponding settings and status displays.
h. General Settings: include map selection, track display, unit setting, and lights setting.
AR Projection
DJI Pilot 2 App supports AR projection, including:
a. Home Point: when the Home Point is beyond the current view, it will be displayed on the
edge of the view. The aircraft can be turned towards the Home Point by following the arrow.
b. PinPoints: a PinPoint appears bigger when near the aircraft and smaller when it is far. This
allows users to judge the distance between the PinPoint and the aircraft from the size of the
PinPoint. When a PinPoint selected is beyond the current view, it will be displayed on the
edge of the view. The aircraft can be turned towards the PinPoint by following the arrow.
c. Waypoints: in a mission flight, the two waypoints the aircraft is about to reach will be
projected on FPV camera view or gimbal camera view. The next waypoint to be reached will
appear as a solid triangle and a serial number; while the subsequent waypoint will appear as
a dotted triangle and a serial number.
d. ADS-B Manned Airplane: when a manned airplane is detected close by, it will be projected
on FPV camera view and gimbal camera view. Ascend or descend the aircraft as soon as
possible to avoid the manned airplane by following the prompted instructions.