MATRICE 350 RTK
User Manual
©
2023 DJI All Rights Reserved.
79
6. Album
Tap to view your masterpieces all in one place. You can save the photos or videos to the
remote controller. Note that photos and videos cannot be viewed if disconnected form the
aircraft.
7. Academy
Tap to view enterprise product tutorials, ight guides, industry cases, and download product
manuals to the remote controller.
8. Device Status
Displays the status of the aircraft, remote controller, and payload.
a. If the current remote controller is not connected to the aircraft, the picture of the
remote controller will be displayed. Tap to link the remote controller to the aircraft, and
the aircraft model and picture will be displayed after it is connected.
b. The maintenance information of the current aircraft is displayed here. If the aircraft
has DJI Care, its validity period will also be shown. Tap to view the device information,
including cycle count, ight duration, ight history, activation time, and ight mileage.
c. If the payload is abnormal, the payload name will appear in orange or red. Tap to view
the error information on the payload.
d. The current remote controller role is displayed as A or B (the role name of the current
remote controller appears in dark black). Tap to view the error information on the
remote controller or switch the remote controller role.
e. Tap to select aircraft model.
f. Tap to enter the health management system. The health status of the aircraft and the
remote controller is displayed here. If it appears in green (normal), the aircraft is normal
and can take o. If in orange (caution) or red (warning), the aircraft has an error and
must be checked and cleared before takeo. Read the Health Management System (HMS)
section for more details.
9. Firmware Update Shortcut
If an update is necessary, a prompt will appear notifying the user that new firmware is
available or a consistent rmware update is needed for the aircraft and remote controller.
a
b
c d
e
f
To Next Page
Loading...
