dji MATRICE 350 RTK - Page 120

MATRICE 350 RTK User Manual
120
©
2023 DJI All Rights Reserved.
• Note that the aircraft cannot sense obstacles that are not within the detection range. Fly
with caution.
• The effective detection distance varies depending on the size and material of the
obstacle. For example, when sensing strong reective objects (such as buildings), the
eective detection distance is around 30 m. When sensing weak reective objects (such
as dry tree branches), the distance is around 15 m. Obstacle sensing may malfunction
or be invalid in areas outside of the eective detection distance.
Obstacle Avoidance Function Usage
The radar obstacle avoidance function should be enabled in the DJI Pilot 2 App. Set the aircraft
safety distance (recommended to be greater than 2.5 meters) in app. Maintain a ight speed
less than 10 m/s when the radar module is in use. Flying higher than 4 meters is recommended
for better obstacle avoidance performance.
• DO NOT touch or let your hands or body come in contact with the metal parts of the
radar module when powering on or immediately after ight as they may be hot.
• In Manual operation mode, users have complete control of the aircraft. Pay attention
to the flying speed and direction when operating. Be aware of the surrounding
environment and avoid the blind spots of the radar module.
• If another device is installed on the aircraft, please avoid blocking the radar FOV. If the
radar FOV is blocked, the obstacle avoidance performance of the radar may decrease.
Please y with caution.
• Obstacle Avoidance is disabled in Attitude mode.
• Maintain full control of the aircraft at all times and DO NOT rely on the radar module
and DJI Pilot 2 app. Keep the aircraft within VLOS at all times. Use your discretion to
operate the aircraft manually to avoid obstacles.
• The radar modules sensitivity can be reduced when operating several radar equipped
aircraft within a short distance from each other. Fly with caution.
• Before use, make sure that the radar module is clean and the outer protective cover is
not cracked, chipped, sunken, or misshapen.
• DO NOT attempt to disassemble any part of the radar module that has already been
mounted prior to shipping.
• The radar module is a precision instrument. DO NOT squeeze, tap, or hit the radar
module.
• If the radar module frequently detects obstacles incorrectly, check to make sure the
mounting bracket and the aircraft landing gear are properly secured. If the radar
module still does not work, contact DJI Support or a DJI authorized dealer.
• Keep the protective cover of the radar module clean. Clean the surface with a soft
damp cloth and air dry before using again.