dji MATRICE 350 RTK - Page 34

MATRICE 350 RTK User Manual
34
©
2023 DJI All Rights Reserved.
7. Power on the aircraft and the remote controller, toggle the ight mode switch to N-mode.
Make sure the status LED and the aircraft authority button on the remote controller are
solid green. This indicates that the aircraft and the remote controller are linked and the
remote controller is in control of the aircraft.
8. Place the aircraft on open and at ground. Make sure there are no obstacles, buildings, or
trees nearby and that the aircraft is 5 m away from the pilot. The pilot should be facing the
rear of the aircraft.
9. To ensure ight safety, enter the camera view of DJI Pilot 2 and check the parameters on the
Preight Check such as the control stick mode, RTH height, obstacle distance, and failsafe
settings. It is recommended to set the failsafe action to RTH.
10. Divide the airspace for ight when multiple aircraft are operating simultaneously in order to
avoid collision mid-air.
11. Check if the Remote ID is up to date and working.