dji MATRICE 350 RTK - Page 46

MATRICE 350 RTK User Manual
46
©
2023 DJI All Rights Reserved.
16. C3 Button
Customize functions in DJI Pilot 2.
17. Left Dial
Controls the tilt of the gimbal.
18. Record Button
Press once to start or stop recording.
19. Flight Mode Switch
For switching between three ight modes:
N-mode (Normal), S-mode (Sport), and
F-mode (Function). F-mode can be set to
A-mode (Attitude) or T-mode (Tripod) in
DJI Pilot 2.
20. Internal Antennas
Transmit aircraft control and video
wireless signals. DO NOT block the
internal RC antennas during usage.
Otherwise, the signal may be aected.
21. microSD Card Slot
For inserting a microSD card.
22. USB-A Port
When ying with a Matrice series aircraft,
users can connect the remote controller
to a intelligent battery station for
rmware updates. Users can also insert
third-party devices, such as a USB ash
drive or a memory card.
23. HDMI Port
For outputting HDMI signal to an external
monitor.
24. USB-C Port
For charging the remote controller.
25. Focus/Shutter Button
Press the button halfway down for
autofocus and all the way down to take a
photo.
26. Right Dial
Controls the pan of the gimbal.
27. Scroll Wheel
For adjusting camera zoom.
28. Handle
29. Speaker
30. Air Vent
For heat dissipation. DO NOT block the
air vent during usage.
31. Reserved Mounting Holes
For mounting external devices.
controller is powered on, press
once to turn the touchscreen on
or o.
14. 5D Button
View the default 5D button
functions in DJI Pilot 2. Refer to
Guide on the home screen for
more information.
15. Flight Pause Button
Press once to have the aircraft brake and
hover in place (only when GNSS or vision
systems are available).
34
32
4 1 4 1
36
35
33
37
38 39
8
13
5 5
7
7
1
4
4
3
15
2
10
11
9
9
16
17
18
19
25
26
27
28
3 0
29
21
22
23
24
31 31
31
4 0
2 0 2 0
12
6
14
34
32
4 1 4 1
36
35
33
37
38 39
8
13
5 5
7
7
1
4
4
3
15
2
10
11
9
9
16
17
18
19
25
26
27
28
3 0
29
21
22
23
24
31 31
31
4 0
2 0 2 0
12
6
14