dji MATRICE 350 RTK - Page 58

MATRICE 350 RTK User Manual
58
©
2023 DJI All Rights Reserved.
Remote
Controller
(Mode 2)
Aircraft Remarks
Moving the left stick up or down changes
the aircraft’s altitude. Push the stick up to
ascend and down to descend. The more the
stick is pushed away from the center position,
the faster the aircraft will change altitude.
Push the stick gently to prevent sudden and
unexpected changes in altitude.
Moving the left stick to the left or right
controls the orientation of the aircraft. Push
the stick left to rotate the aircraft counter-
clockwise and right to rotate the aircraft
clockwise. The more the stick is pushed
away from the center position, the faster the
aircraft will rotate.
Moving the right stick up and down changes
the aircraft’s pitch. Push the stick up to y
forward and down to y backward. The more
the stick is pushed away from the center
position, the faster the aircraft will move.
Moving the right stick to the left or right
changes the aircraft’s roll. Push the stick left
to y left and right to y right. The more the
stick is pushed away from the center position,
the faster the aircraft will move.
• Keep the remote controller away from magnetic materials such as magnets and
loudspeaker boxes to avoid magnetic interference.
• To avoid damage to the control sticks, it is recommended that the remote controller
be stored in the carrying case when being carried or transported.
The default mode is Mode 2. See the gures below to check the function of each control stick in
the three pre-programmed modes.
Center position: control sticks are centered.
Moving the control stick: control sticks are pushed away from the center.