dji MATRICE 350 RTK - Page 64

MATRICE 350 RTK User Manual
64
©
2023 DJI All Rights Reserved.
transmission. However, if aircraft control is locked, only the remote controller with aircraft
control can be used to adjust these settings.
9. Remote controller A can be used to update the firmware of all modules at once when
connected with the aircraft, but remote controller B can only be used to update the
rmware of remote controller B.
10. Uploading Logs Using DJI Pilot 2: the pilot can upload the logs of both the aircraft and
remote controller A through remote controller A, and can upload the logs of remote
controller B through remote controller B.
11. The pilot of remote controller B cannot adjust settings for network RTK or custom network
RTK.
12. Remote controller B cannot be used to update the GEO Zone database.
13. Other non ight-related operations can be performed using either remote controller.