dji MATRICE 350 RTK - Page 89

MATRICE 350 RTK User Manual
©
2023 DJI All Rights Reserved.
89
a. The photo modes include single, timed, High-Res Grid shooting, panorama, etc. The
options vary according to the gimbal camera model.
b. Various resolutions can be selected in video recording mode. The options vary according
to the gimbal camera model.
10. Shoot/Record Button: tap to take a photo or start or stop recording.
11. Playback: tap to enter the album to view and download photos/videos stored in the
aircraft's microSD card.
12. Link Zoom: tap to link the lenses of the thermal camera and zoom camera to zoom. The
user can view the linked zoom effect by enabling the SBS button in the thermal camera
view. Only H20N supports link zoom.
13. Press the R1 button on the remote controller, and the camera lens will zoom in.
14. Press the R2 button on the remote controller, and the camera lens will zoom out.
15. Press the R3 button on the remote controller to switch to FPV Camera View.
16. FPV Camera View: tap to switch to FPV camera view. The FPV camera view supports
zooming in and out.
17. Map View: tap to switch to map view. The map view supports zooming in and out.
18. PinPoint: press the L3 button on the remote controller to add a PinPoint in the center of the
screen. Press and hold on the L3 button to expand the PinPoint settings panel, which allows
you to set the PinPoint color, view all target points, or enable the default display of target
points in video transmission view. Refer to the PinPoint section for more details.
19. Switch to Wide/Zoom Camera Lens: press the L2 button on the remote controller to switch
between the wide-angle camera lens and the zoom camera lens.
20. Switch to Visible Light/Thermal Camera Lens: press the L1 button on the remote controller
to switch between the visible light camera lens (wide-angle camera or zoom camera) and
the thermal camera lens.
21. Gimbal Mode: displays the current gimbal status as follow mode. Tap to select an action
such as gimbal recenter, gimbal pan recenter, gimbal tilt down, or gimbal down, or switch to
gimbal free mode.
22. Smart Track: the aircraft's gimbal camera can track the target (person/vehicle/boat) when
Smart Track is enabled. Refer to the Smart Track section for more details.
23. RNG Laser Rangender: the straight-line distance between the aircraft and the target, as
well as the height of the target can be measured using the RNG Laser Rangender. Refer to
the RNG Laser Rangender section for more details.
24. Look At: after selecting a PinPoint, the user can tap the Look At icon to rotate the gimbal,
allowing the camera to look at the target.
25. Status of Photo/Video Upload to Cloud: displays the status of a photo/video upload from
DJI Pilot 2 to DJI FlightHub 2 or the connection status of a live stream; tap to view the details.
If you are using the DJI FlightHub 2 cloud service, you can quickly congure its media le
upload settings.