Draytek Vigor2925 Series User Manual

Vigor2925 Series User’s Guide
87
I
I
I
I
.
.
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
i
i
n
n
g
g
t
t
h
h
e
e
L
L
A
A
N
N
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
After finished the WAN settings for IPv6, please configure the LAN settings to make the
router’s client getting the IPv6 address.
1. Access into the web user interface of Viogr2925. Open LAN>> General Setup. Click
the IPv6 button.
2. In the field of Router Advertisement Server, the default setting is Enable. The client’s
PC will ask router advertisement service for the Prefix of IPv6 address automatically,
and generate an Interface ID by itself to compose a full and unique IPv6 address.
3. In the field of DHCPv6 Server Configuration, when DHCPv6 service is enabled, you
can assign available IPv6 address for the client manually.
Note: When both mechanisms are enabled, the client can determine which mechanism
to be used (e.g., the default mechanism for Windows7 is router advertisement service).

Draytek Vigor2925 Series Specifications

General

WAN Ports	2 x Gigabit Ethernet
LAN Ports	4 x Gigabit Ethernet
USB Ports	2 x USB 2.0
VPN Tunnels	50
Humidity	10% to 90% non-condensing
VPN Throughput	200 Mbps
Load Balancing	Yes
QoS	Yes
VPN Protocols	IPSec, PPTP, L2TP, SSL
Firewall	SPI
Power Supply	12V DC
Operating Temperature	0°C to 40°C
Storage Temperature	-25°C to 70°C
Wireless	Optional (with Vigor2925ac)