Vigor2925 Series User’s Guide
528
4
4
.
.
2
2
1
1
.
.
4
4
U
U
s
s
e
e
r
r
P
P
a
a
s
s
s
s
w
w
o
o
r
r
d
d
This page allows you to set new password for user operation.
Available settings are explained as follows:
Item Description
Enable User Mode for
simple web configuration
After checking this box, you can access into the web user
interface with the password typed here for simple web
configuration.
The settings on simple web user interface will be different
with full web use interface accessed by using the
administrator password.
Password
Type in new password in this field. The length of the
password is limited to 31 characters.
Confirm Password
Type in the new password again.
Set to Factory Default
Click to return to the factory default setting.
When you click OK, the login window will appear. Please use the new password to access
into the web user interface again.
Below shows an example for accessing into User Operation with User Password.
1. Open System Maintenance>>User Password.
2. Check the box of Enable User Mode for simple web configuration to enable user mode
operation. Type a new password in the field of New Password and click OK.
To Next Page
Loading...
Need help?
General
