Vigor2925 Series User’s Guide
527
User Name – Give a user name for the local user.
Password – Type the password for the local user.
Confirm Password – Type the password again for
confirmation.
Add – After typing the user name and password above,
simply click it to create a new local user. The new one will
be shown on the Local User List immediately.
Edit – If the username listed on the box above is not
satisfied, simply click the username and modify it on the
field of User Name. Later, click Edit to update the
information.
Delete – If the local user listed on the box above is not
satisfied, simply click the username and click Delete to
remove it.
Enable Admin Login From Wan – The default setting is
enabled. It can ensure that any user is able to successfully
accesses into web user interface of Vigor router through
Internet by username/password of “admin/admin”.
Administrator LDAP
Setting
Enable LDAP/AD login for Admin users – If it is
enabled, any user can access into the web user interface of
Vigor router through the LDAP server authentication.
Enable Admin Login From Wan – The default setting is
enabled. It can ensure that any user is able to successfully
accesses into web user interface of Vigor router through
Internet by username/password of “admin/admin”.
LDAP Server Profiles – Available profiles will be
displayed here under the link of LDAP Profile Setup.
LDAP Profile Setup – It allows you to create a new LDAP
profile.
When you click OK, the login window will appear. Please use the new password to access
into the web user interface again.
To Next Page
Loading...
Need help?
General
