Draytek Vigor2925 Series User Manual

Vigor2925 Series User’s Guide
51
2
2
.
.
1
1
.
.
3
3
F
F
o
o
r
r
L
L
T
T
E
E
W
W
A
A
N
N
LTE WAN is dedicated to physical mode in USB. Such WAN will be available when LTE
SIM card is installed onto your Vigor router (e.g., Vigor2925L or Vigor2925Ln).
1. Choose LTE as WAN Interface.
2. Then, click Next for getting the following page.
Available settings are explained as follows:
Item Description
Internet Access
Now, DHCP mode is the only choice for LTE WAN.
3G/4G USB
Modem (DHCP
mode)
SIM Pin code – Type PIN code of the SIM card that will be
used to access Internet.
Network Mode – Force Vigor router to connect Internet with
the mode specified here. If you choose 4G/3G/2G as network
mode, the router will choose a suitable one according to the
actual wireless signal automatically.
APN Name – APN means Access Point Name which is

Draytek Vigor2925 Series Specifications

General

WAN Ports	2 x Gigabit Ethernet
LAN Ports	4 x Gigabit Ethernet
USB Ports	2 x USB 2.0
VPN Tunnels	50
Humidity	10% to 90% non-condensing
VPN Throughput	200 Mbps
Load Balancing	Yes
QoS	Yes
VPN Protocols	IPSec, PPTP, L2TP, SSL
Firewall	SPI
Power Supply	12V DC
Operating Temperature	0°C to 40°C
Storage Temperature	-25°C to 70°C
Wireless	Optional (with Vigor2925ac)