Draytek Vigor2925 Series User Manual

Vigor2925 Series User’s Guide
545
4
4
.
.
2
2
1
1
.
.
1
1
1
1
R
R
e
e
b
b
o
o
o
o
t
t
S
S
y
y
s
s
t
t
e
e
m
m
The Web user interface may be used to restart your router. Click Reboot System from System
Maintenance to open the following page.
Index (1-15) in Schedule Setup - You can type in four sets of time schedule for performing
system reboot. All the schedules can be set previously in Applications >> Schedule web page
and you can use the number that you have set in that web page.
If you want to reboot the router using the current configuration, check Using current
configuration and click Reboot Now. To reset the router settings to default values, check
Using factory default configuration and click Reboot Now. The router will take 5 seconds
to reboot the system.
Note: When the system pops up Reboot System web page after you configure web settings,
please click Reboot Now to reboot your router for ensuring normal operation and
preventing unexpected errors of the router in the future.

Draytek Vigor2925 Series Specifications

General

WAN Ports	2 x Gigabit Ethernet
LAN Ports	4 x Gigabit Ethernet
USB Ports	2 x USB 2.0
VPN Tunnels	50
Humidity	10% to 90% non-condensing
VPN Throughput	200 Mbps
Load Balancing	Yes
QoS	Yes
VPN Protocols	IPSec, PPTP, L2TP, SSL
Firewall	SPI
Power Supply	12V DC
Operating Temperature	0°C to 40°C
Storage Temperature	-25°C to 70°C
Wireless	Optional (with Vigor2925ac)