Draytek Vigor2925 Series User Manual

Vigor2925 Series User’s Guide
547
4
4
.
.
2
2
1
1
.
.
1
1
3
3
A
A
c
c
t
t
i
i
v
v
a
a
t
t
i
i
o
o
n
n
There are three ways to activate WCF on vigor router, using Service Activation Wizard, by
means of CSM>>Web Content Filter Profile or via System Maintenance>>Activation.
After you have finished the setting profiles for WCF (refer to Web Content Filter Profile), it
is the time to activate the mechanism for your computer.
Click System Maintenance>>Activation to open the following page for accessing
http://myvigor.draytek.com.
Available settings are explained as follows:
Item Description
Activate via Interface
Choose WAN interface used by such device for activating
Web Content Filter.
Activate
The Activate link brings you accessing into
www.vigorpro.com to finish the activation of the account
and the router.
Authentication Message
As for authentication information of web filter, the process
of authenticating will be displayed on this field for your
reference.
Below shows the successful activation of Web Content Filter:

Draytek Vigor2925 Series Specifications

General

WAN Ports	2 x Gigabit Ethernet
LAN Ports	4 x Gigabit Ethernet
USB Ports	2 x USB 2.0
VPN Tunnels	50
Humidity	10% to 90% non-condensing
VPN Throughput	200 Mbps
Load Balancing	Yes
QoS	Yes
VPN Protocols	IPSec, PPTP, L2TP, SSL
Firewall	SPI
Power Supply	12V DC
Operating Temperature	0°C to 40°C
Storage Temperature	-25°C to 70°C
Wireless	Optional (with Vigor2925ac)