Draytek Vigor2925 Series User Manual

Vigor2925 Series User’s Guide
338
4
4
.
.
9
9
.
.
5
5
D
D
N
N
S
S
F
F
i
i
l
l
t
t
e
e
r
r
P
P
r
r
o
o
f
f
i
i
l
l
e
e
The DNS Filter monitors DNS queries on UDP port 53 and will pass the DNS query
information to the WCF to help with categorizing HTTPS URL's.
DNS can be specified in LAN>>General Setup by using the server (e.g., 168.95.1.1) on
router or external DNS server (e.g., 8.8.8.8). If the router server is used, DNS Filter General
Setting will be applied to DNS query from clients on LAN. However, if the external DNS
server is used, DNS Filter Profile will be applied to DNS query coming from clients on LAN.
Note: For DNS filter must use the WCF service profile to filter the packets, therefore
WCF license must be activated first. Otherwise, DNS filter does not have any effect on
packets.
Available settings are explained as follows:
Item Description
DNS Filter Profile Table
It displays a list of different DNS filter profiles (with
specified WCF and UCF).
Click the profile link to open the following page. Then, type
the name of the profile and specify WCF/UCF based on
your requirement.

Draytek Vigor2925 Series Specifications

General

WAN Ports	2 x Gigabit Ethernet
LAN Ports	4 x Gigabit Ethernet
USB Ports	2 x USB 2.0
VPN Tunnels	50
Humidity	10% to 90% non-condensing
VPN Throughput	200 Mbps
Load Balancing	Yes
QoS	Yes
VPN Protocols	IPSec, PPTP, L2TP, SSL
Firewall	SPI
Power Supply	12V DC
Operating Temperature	0°C to 40°C
Storage Temperature	-25°C to 70°C
Wireless	Optional (with Vigor2925ac)