Name: Draytek Vigor2925 Series
Brand: Draytek
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Vigor2925 Series User’s Guide

244

Wizard Mode

Allow to configure frequently used settings of route policy

via three setting pages

Advance Mode

Allow to configure detailed settings of route policy.

To use Wizard Mode, simple do the following steps:

1. Click the Wizard Mode radio button.

2. Click any Index number link (e.g., 2 in this case). The setting page will appear as follows:

Available settings are explained as follows:

Item Description

Source IP

Any – Any IP can be treated as the source IP.

Src IP Start - Type the source IP start for the specified

WAN interface.

Src IP End - Type the source IP end for the specified

WAN interface. If this field is blank, it means that all the

source IPs inside the LAN will be passed through the WAN

interface.

Destination IP

Any – Any IP can be treated as the destination IP.

Dest IP Start- Type the destination IP start for the

specified WAN interface.

Dest IP End - Type the destination IP end for the specified

WAN interface. If this field is blank, it means that all the

destination IPs will be passed through the WAN interface.

3. Click Next to get the following page.

Questions and Answers:

Need help?

Do you have a question about the Draytek Vigor2925 Series and is the answer not in the manual?

Draytek Vigor2925 Series Specifications

General