Name: Draytek Vigor2925 Series
Brand: Draytek
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Vigor2925 Series User’s Guide

249

More options

Packet Forwarding to WAN via – When you choose

WAN (e.g., WAN1) as the Interface for packet

transmission, you have to specify the way the packet

forwarded to. Choose Force NAT or Force Routing.

Failover to – Check this button to lead the data passing

through specific interface (WAN/LAN/VPN/Route Policy)

automatically when the selected interface (defined in Send

via if criteria matched) is down.

 WAN/LAN – Use the drop down list to choose an

interface as an auto failover interface.

 VPN – Use the drop down list to choose a VPN tunnel

as a failover tunnel.

 Route Policy – Use the drop down list to choose an

existed route policy profile.

Gateway IP – Specific gateway is used only when you

want to forward the packets to the desired gateway.

Usually, Default Gateway is selected in default.

3. When you finish the configuration, please click OK to save and exit this page.

Questions and Answers:

Need help?

Do you have a question about the Draytek Vigor2925 Series and is the answer not in the manual?

Draytek Vigor2925 Series Specifications

General