Vigor2925 Series User’s Guide
321
To set a new profile, please do the steps listed below:
1. Open Object Setting>>Notification Object, and click the number (e.g., #1) under Index
column for configuration in details.
2. The configuration page will be shown as follows:
Available settings are explained as follows:
Item Description
Profile Name
Type a name for such notification profile. The maximum
length of the name you can set is 15 characters.
Category
Display the types that will be monitored.
Status
Display the status for the category. You can check the box
to be monitored.
For example, the check box of CPE firmware upgrade fail
under the category of Central VPN Management is
checked. Once such profile is enabled, Vigor router system
will send out notification to the recipient via SMS.
To Next Page