Vigor2925 Series User’s Guide
332
matching with the conditions specified in URL Access
Control and Web Feature below, such function can
determine the priority for the actions executed. For this one,
the router will process the packages with the conditions set
below for web feature first, then URL second.
Log
None – There is no log file will be recorded for this profile.
Pass – Only the log about Pass will be recorded in Syslog.
Block – Only the log about Block will be recorded in
Syslog.
All – All the actions (Pass and Block) will be recorded in
Syslog.
URL Access Control
Enable URL Access Control - Check the box to activate
URL Access Control. Note that the priority for URL
Access Control is higher than Restrict Web Feature. If
the web content match the setting set in URL Access
Control, the router will execute the action specified in this
field and ignore the action specified under Restrict Web
Feature.
Prevent web access from IP address - Check the box to
deny any web surfing activity using IP address, such as
http://202.6.3.2. The reason for this is to prevent someone
dodges the URL Access Control. You must clear your
browser cache first so that the URL content filtering facility
operates properly on a web page that you visited before.
Action – This setting is available only when Either : URL
Access Control First or Either : Web Feature First is
selected.
Pass - Allow accessing into the corresponding webpage
with the keywords listed on the box below.
Block - Restrict accessing into the corresponding webpage
with the keywords listed on the box below.
If the web pages do not match with the keyword set here, it
will be processed with reverse action.
Group/Object Selections – The Vigor router provides
several frames for users to define keywords and each frame
To Next Page
Loading...
Need help?
General
