Vigor2925 Series User’s Guide
356
Available settings are explained as follows:
Item Description
Set to Factory
Default
Clear all profiles and recover to factory settings.
Enable Dynamic
DNS Setup
Check this box to enable DDNS function.
View Log
Display DDNS log status.
Force Update
Force the router updates its information to DDNS server.
Auto-Update
interval
Set the time for the router to perform auto update for DDNS
service.
Index
Click the number below Index to access into the setting
page of DDNS setup to set account(s).
WAN Interface
Display the WAN interface used.
Domain Name
Display the domain name that you set on the setting page of
DDNS setup.
Active
Display if this account is active or inactive.
3. Select Index number 1 to add an account for the router. Check Enable Dynamic DNS
Account, and choose correct Service Provider: dyndns.org, type the registered hostname:
hostname and domain name suffix: dyndns.org in the Domain Name block. The
following two blocks should be typed your account Login Name: test and Password: test.
Available settings are explained as follows:
Item Description
Enable Dynamic
DNS Account
Check this box to enable the current account. If you did
check the box, you will see a check mark appeared on the
Active column of the previous web page in step 2).
To Next Page
Loading...
Need help?
General
