Vigor2925 Series User’s Guide
359
page.
Profile
Display the name of the LAN DNS profile.
Domain Name
Display the domain name of the LAN DNS profile.
You can set up to 20 LAN DNS profiles.
To create a LAN DNS profile:
1. Click any index, say Index No. 1.
2. The detailed settings with index 1 are shown below.
Available settings are explained as follows:
Item Description
Enable
Check this box to enable such profile.
Profile
Type a name for such profile.
Note: If you type a name here for LAN DNS and click OK
to save the configuration, the name also will be applied to
conditional DNS forwarding automatically.
Domain Name
Type the domain name for such profile.
CNAME (Alias
Domain Name)
CNAME is abbreviation of Canonical name record.
Such option is used to record the domain name or the host
alias.
Add – Click it to add a new host with specified reference.
Delete – Click it to remove the setting.
IP Address List
The IP address listed here will be used for mapping with the
domain name specified above. In general, one domain name
maps with one IP address. If required, you can configure
two IP addresses mapping with the same domain name.
To Next Page
Loading...
Need help?
General
