Name: Draytek Vigor2925 Series
Brand: Draytek
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Vigor2925 Series User’s Guide

488

There are two methods to do network connection through WPS between AP and Stations:

pressing the Start PBC button or using PIN Code.

 On the side of Vigor2925 series which served as an AP, press WPS button once on the

front panel of the router or click Start PBC on web configuration interface. On the side

of a station with network card installed, press Start PBC button of network card.

 If you want to use PIN code, you have to know the PIN code specified in wireless client.

Then provide the PIN code of the wireless client you wish to connect to the vigor router.

For WPS is supported in WPA-PSK or WPA2-PSK mode, if you do not choose such mode in

Wireless LAN>>Security, you will see the following message box.

Please click OK and go back Wireless LAN>>Security to choose WPA-PSK or WPA2-PSK

mode and access WPS again.

Questions and Answers:

Need help?

Do you have a question about the Draytek Vigor2925 Series and is the answer not in the manual?

Draytek Vigor2925 Series Specifications

General