Vigor2925 Series User’s Guide
510
Item Description
Enable
Check this box to enable such profile.
Group Name
Type a name for such profile. The length of the name is
limited to 23 characters.
Access Authority
Specify the authority for such profile.
At present, Vigor router allows you to create SSL Web Proxy
and SSL Application profiles used for SSL VPN. The
available profiles will be displayed here for you to select.
Authentication Methods
It can determine the authentication method used for such
profile.
Local User DataBase – The system will do the
authentication by using the user defined account profiles (in
VPN and Remote Access>>Remote Dial-In User). The
enabled profiles will be listed in the Available User Account
on the left box. To add a profile into a group, simply choose
the one from the left box and click the >> button. It will be
displayed in the Selected User Account on the right box.
RADIUS – The RADIUS server will do the authentication by
using the username and password.
TACACS+ - The TACACS+ will do the authentication by
using the username and password.
LDAP / Active Directory - If it is checked, the LDAP / AD
server will do the authentication by using the username,
password, information stated on the selected profiles.
If the above three options are enabled, the system will do the
authentication based on them in sequence.
After finishing all the settings here, please click OK to save the configuration.
To Next Page
Loading...
Need help?
General
