EasyManuals Logo

Draytek Vigor2925 Series User Manual

Draytek Vigor2925 Series
781 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #559 background imageLoading...
Page #559 background image
Vigor2925 Series User’s Guide
543
The web user interface will be open until you click the
Logout icon manually.
Enable Validation Code
in Internet/LAN Access
If it is enabled, the mechanism of validation code will be
offered by Vigor router. That is, the client must type
validation code while accessing into Internet or web user
interface of Vigor router.
Internet Access Control
Allow management from the Internet - Enable the
checkbox to allow system administrators to login from the
Internet. There are several servers provided by the system to
allow you managing the router from Internet. Check the
box(es) to specify.
Disable PING from the Internet - Check the checkbox to
reject all PING packets from the Internet. For security issue,
this function is enabled by default.
LAN Access Control
Allow management from LAN- Enable the checkbox to
allow system administrators to login from LAN interface.
There are several servers provided by the system which allow
you to manage the router from LAN interface. Check the
box(es) to specify.
Apply To Subnet – Check the interface for the administrator
to use for accessing into web user interface of Vigor router.
Access List from the
Internet
You could specify that the system administrator can only
login from a specific host or network defined in the list. A
maximum of three IPs/subnet masks is allowed.
List IP - Indicate an IP address allowed to login to the router.
Subnet Mask - Represent a subnet mask allowed to login to
the router.
Management Port Setup
User Define Ports - Check to specify user-defined port
numbers for the Telnet, HTTP, HTTPS, FTP, TR-069 and
SSH servers.
Default Ports - Check to use standard port numbers for the
Telnet and HTTP servers.
TLS/SSL Encryption
Setup
Enable SSL 3.0 – Check the box to enable the function of
SSL 3.0 if required.
Due to for security consideration, the built-in HTTPS and
SSL VPN server of the router had upgraded to TLS1.x
protocol. If you are using old browser (eg. IE6.0) or old
SmartVPN Client, you may still need to enable SSL 3.0 to
make sure you can connect, however, it's not recommended.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Draytek Vigor2925 Series and is the answer not in the manual?

Draytek Vigor2925 Series Specifications

General IconGeneral
WAN Ports2 x Gigabit Ethernet
LAN Ports4 x Gigabit Ethernet
USB Ports2 x USB 2.0
VPN Tunnels50
Humidity10% to 90% non-condensing
VPN Throughput200 Mbps
Load BalancingYes
QoSYes
VPN ProtocolsIPSec, PPTP, L2TP, SSL
FirewallSPI
Power Supply12V DC
Operating Temperature0°C to 40°C
Storage Temperature-25°C to 70°C
WirelessOptional (with Vigor2925ac)

Related product manuals