Draytek Vigor2925 Series User Manual

Vigor2925 Series User’s Guide
565
Stable
“No” means the primary router has not been determined yet.
DARP is negotiating.
“YES” means the primary router is determined.
WAN
“At Least One UP” means that at least one WAN interface
connects to Internet.
“All WANs Down” means that no WAN interface connects
to Internet.
Config Sync Status
“Not Ready” means configuration synchronization is unable
to execute, or configuration synchronization is disabled, or
synchronization initialization executes but fails.
“Ready” means configuration synchronization is ready to
execute.
“Progressing” means configuration synchronization is
operating.
“Fail” means configuration synchronization executed and
failed; or wrong model name.
“Equal” means the corresponding settings are equal to the
primary router.
Cached Time
Display the time period since the last time to get the newest
status of other router (except the primary router).
Cick the link of Status, Router Name, IPv4 or Details, the following page will be displayed
on the screen.

Draytek Vigor2925 Series Specifications

General

WAN Ports	2 x Gigabit Ethernet
LAN Ports	4 x Gigabit Ethernet
USB Ports	2 x USB 2.0
VPN Tunnels	50
Humidity	10% to 90% non-condensing
VPN Throughput	200 Mbps
Load Balancing	Yes
QoS	Yes
VPN Protocols	IPSec, PPTP, L2TP, SSL
Firewall	SPI
Power Supply	12V DC
Operating Temperature	0°C to 40°C
Storage Temperature	-25°C to 70°C
Wireless	Optional (with Vigor2925ac)