Draytek Vigor2925 Series User Manual

Vigor2925 Series User’s Guide
681
line.
-c
It means to type a brief description for the setting profile.
-e
It means to enable/disable the specified profile.
1: Enable
0: Disable
-p
It means to set the the protocol for the profile.
1: TCP
2: UDP
3: All
-t
It means to set triggering port.
-P
It means to set the protocol for incomming packets.
1:TCP
2:UDP
3:All
-i
It means to set the protocol for incomming port.
The range is from 0 to 65535.
-d
It means to delete the specified profile.
-v
It means to display port trigger setting.
E
E
x
x
a
a
m
m
p
p
l
l
e
e
> srv nat trigger 1 -c test -e 1 -p 1 -t 500 -P 1 -i 1000
> srv nat trigger -v
%% Port Trigger Rule status:
Index Status Comment TProto TPort IProto IPort
-----------------------------------------------------
1 Enable test TCP 500 TCP 1000
2 Disable
3 Disable
4 Disable
5 Disable
6 Disable
7 Disable
8 Disable
9 Disable
10 Disable
11 Disable
12 Disable
13 Disable
14 Disable
15 Disable
16 Disable
17 Disable
18 Disable
19 Disable
20 Disable

Draytek Vigor2925 Series Specifications

General

WAN Ports	2 x Gigabit Ethernet
LAN Ports	4 x Gigabit Ethernet
USB Ports	2 x USB 2.0
VPN Tunnels	50
Humidity	10% to 90% non-condensing
VPN Throughput	200 Mbps
Load Balancing	Yes
QoS	Yes
VPN Protocols	IPSec, PPTP, L2TP, SSL
Firewall	SPI
Power Supply	12V DC
Operating Temperature	0°C to 40°C
Storage Temperature	-25°C to 70°C
Wireless	Optional (with Vigor2925ac)