Vigor2925 Series User’s Guide
746
wl dual wds ap [value]
wl dual wds hello [value]
wl dual wds status
wl dual wds show
wl dual wds mac add [index addr]
wl dual wds mac clear/disable/enable [index/all]
wl dual wds flush
S
S
y
y
n
n
t
t
a
a
x
x
D
D
e
e
s
s
c
c
r
r
i
i
p
p
t
t
i
i
o
o
n
n
Parameter Description
mode [value]
It means to specify connection mode for WDS.
[value]: Available settings are :
d: Disable
b: Bridge
r: Repeapter
security [value]
It means to configure security mode with encrypted keys for
WDS.
mode: Available settings are:
disable: No security.
wep: WEP
wpapsk [key]: WPA/PSK
wpa2psk [key]: WPA2/PSK
key: Moreover, you have to add keys for wpapsk, wpa2psk,
and wep, and specify index number of schedule profiles to be
followed by the wireless connection.
WEP keys must be in 5/13 ASCII text string or 10/26
Hexadecimal digit format; WPA keys must be in 8~63 ASCII
text string or 64 Hexadecimal digit format.
e.g.,
wl dual wds security disable
wl dual wds security wep 12345
wl dual wds security wpa2psk 12345678
ap [value]
It means to enable or disable the AP function.
Value: 1 – enable the function.
0 – disable the function.
hello [value]
It means to send hello message to remote end (peer).
Value: 1 – enable the function.
0 – disable the function.
status
It means to display WDS link status for 5GHz connection.
show
It means to display current WDS settings.
mac add [index addr]
add [index addr] – Add the peer MAC entry in
Repeater/Bridge WDS MAC table.
mac clear/disable/enable
clear/disable/enable [index/all]- Clear, disable, enable the
To Next Page
Loading...
Need help?
General
