Vigor2925 Series User’s Guide
751
0: Disable.
-g [0/1]
Set the phase 1 method for local 802.1x server.
1: PEAP;
0: None.
-h [0/1]
Set the phase 2 method for local 802.1x server.
1: MSCHAPV2;
0: None.
-i
It means to set idle time.
0: unlimited. Available range is from 0 to 255.
e.g., -i 60
-m
It means to set the maximum login user number.
0: unlimited. Available range is from 0 to 2000.
e.g., -m 200
-n
It means to set a user name for a profile. (Maximum 40
characters)
e.g.,-n fortest
-p
It means to configure user password. (Maximum 40
characters)
e.g., -p 60fortest
-q
It means to set time quota of the user profile. Available range
is from 1 to 65535.
e.g., -q 200
-r
It means to set data quota of the user profile. Available range
is from 1 to 65535.
e.g., -r 1000
-s [sch_idx1, sch_idx2,
sch_idx3, sch_idx4]
It means to set schedule by using schedule index number.
sch_idx could be 1 to 15.
e.g., -s 1,2,3,4
-t
It means to enable /disable time quota limitation for user
profile.
0:Disable
1:Enable
-u
It means to enable /disable data quota limitation for user
profile.
0:Disable
1:Enable
-v
It means to view user profile(s).
-w[MB/GB]
It means to specify the data quota unit (MB/GB).
e.g., -w MB
-x
It means to set external server authentication.
0: None
1: LDAP
2: Radius
3: TACACS+
e.g., -x 2
-l [0/1/2/3]
Set the log type for the user profile.
0: None
1: Login
2: Event
3: All
-P [0/1]
Enable or disable the Pop Browser Tracking Window.
0:Disable
1:Enable
-T [0/1]
Enable or disable to set the authentication by Telnet.
To Next Page
Loading...
Need help?
General
