2 Installation
2.8 Connecting the serial interface
Control Relay easy800 11/11 MN04902001Z-EN www.eaton.com 65
Table 6: Terminal assignment for connecting MFD-CP4 to the serial interface of
easy800-SWD
Carry out the following work with the installation in a de-energized state:
▶ Use the EU4A-RJ45-CAB2 cable.
▶ Insert the cables into the push-in terminals of the MFD-CP4 according to
the terminal assignment ￫ Table 6.
▶ Insert the RJ45 plug into the serial interface of the easy800-SWD device.
MFD-CP4
Wire color of the EU4A-RJ45-CAB2
1 -
2
brown
3
blue
4
white
5
-
To Next Page
Loading...
