Eaton Network-M3 - Page 128

Settings
Contextual help of the web interface – 128
•
•
•
•
•
•
Select the option Using Unicode BOM if needed.
PressSaveafter modifications.
3.7.7.3 Default settings parameters and limitations
Default setting Possible parameters
HTTPS Port — 443 Port — x-xxx
Syslog Enable — disabled
Server#1
Name – Primary
Active – No
Hostname – empty
Port – 514
Protocol – UDP
Message transfer method – Non
transparent framing
Using unicode byte order mask
(BOM)– disabled
Server#2
Name – empty
Active – No
Hostname – empty
Port – 514
Protocol – UDP
Message transfer method –
DIsabled in UDP
Using unicode byte order mask
(BOM)– disabled
Enable — disable/enable
Server#1
Name – 128 characters maximum
Active – No/Yes
Hostname – 128 characters maximum
Port – x-xxx
Protocol – UDP/TCP
Message transfer method – Non transparent framing
Using unicode byte order mask (BOM)– disable/enable
Server#2
Name – 128 characters maximum
Active – No/Yes
Hostname – 128 characters maximum
Port – x-xxx
Protocol – UDP/TCP
Message transfer method (in TCP)– Octet counting/Non
transparent framing
Using unicode byte order mask (BOM)– disable/enable
3.7.7.4 Default settings and possible parameters - Protocols
Default setting Possible parameters