Eaton Network-MS - Page 104

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/JC Page 104/143
Examples #> setSMTP HostName = “Smtp Server”
Comments
(1)
: Writing enabled according to “Authentication” status
(2)
: Don’t forget to set echo off
6.4.2.5 “getSNMP”
Purpose To read a SNMP setting
Syntax getSNMP [option1] [option2]...
options :
snmpVersion
snmpPort
ReadCommunityName
WriteCommunitySecurityLevel
WriteCommunityName
User
UserSecurityLevel
UserPassword
(1)
Admin
AdminSecurityLevel
AdminPassword
(1)
NotificationUserName
FirmwareUpgrade
Examples #> getSNMP User
Comments
(1)
: All characters are replaced with the star character ‘*’
6.4.2.6 “setSNMP”
Purpose To modify a SNMP setting
Syntax getSNMP [option1] [option2]...
options :
snmpVersion = Disabled|V1|V3|V1V3
snmpPort = xx (Default value: 161) (1..65535)
ReadCommunityName = “xx..xx”
(1)
WriteCommunitySecurityLevel = 0|2 (0=No, 2=Yes)
(*)
WriteCommunityName = “xx..xx”
(1)(2)
User = “xx..xx”
(1)
UserSecurityLevel = 1|2|3 (1=No Auth, 2=Auth NoPriv, 3=Auth Priv)
(1)
UserPassword = “xx..xx”
(1)(3)(5)(6)
Admin = “xx..xx”
(1)
AdminSecurityLevel = 1|2|3 (1=No Auth, 2=Auth NoPriv, 3=Auth Priv)
(1)
AdminPassword = “xx..xx”
(1)(4)(5)(6)