EasyManua.ls Logo

ECKELMANN CI 3000 - Page 116

ECKELMANN CI 3000
134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Menu structure of CI 3000
110
Version 2.09 09. April 2014
Activate/deactivate service mode
Using this input screen the service mode is activated for a desired period.
During this specified period all remote alarms are suppressed.
The activation of the service mode is only to be carried out by service personnel! Any alarms (Prior
ity 1 and 2) still active when the set service mode time expires cause the audible signalling devices
and alarm relays to be actuated and are forwarded by automatic fault report transmission.
Case A: Without setpoint interlock - without password request:
INTERLOCK Entry Default
Settings
Possible: = Cancel entry block to allow settings to be made
MODE and -
Case B: With setpoint interlock - with password request:
With activated setpoint interlock (restricted setpoint changes) a password is necessary. The pass
word (6 to 7 characters) must be requested from the manufacturer in conjunction with the specifica
tion of the CI 3000 serial number (see menu 7-2 or the rating plate). It only authorises access for the
current and following day. Afterwards, a new password must be requested! After entering the pass
word, exit the operating screen by pressing the ESC button.
SETPOINT INTERLOCK
Release
Password: XXXXXXX
= lock released
Superuser password entry.
Case A and case B:
By simultaneously pressing the buttons MODE + ENTER ()
the operating screen for entering the service period appears.
Suppress Remote Alarm Entry Default
Duration 60m Time in minutes during which Store Computer is operated in
service mode. All remote alarm transmission is suppressed
during the time specified:
1 to 255: Time for which service mode is to be activated
0: Deactivate service mode
Number
(0..255) and
60
The following screen opens to show service mode status:
Case A INTERLOCK
Input
Settings
Possible = Cancel entry block to allow settings to be made
MODE
and
Service Mode XXXm Time remaining for activated service mode.
Case B SETPOINT INTERLOCK
Release
Password: XXXXXXX
= lock released
password entry.
Service Mode XXXm Time remaining for activated service mode.

Table of Contents