Menu structure of CI 3000
82
Version 2.09 09. April 2014
S Screen 6-1-4-2 Phone Number
This screen is used to enter the telephone number for fault report transmission by the keypad and special char
acters ( 0123456789N*#!&:;.= ) by the cursor keys (↑) (↓).
PHONE NUMBER Entry Default
Store Computer
1234567890123456789
Store Computer (SC) and phone number ↑,↓, number
max. 19 digits
-
SC Extension N
DialOut No 12345678
Outside line access required during duty hours?
Outside line access number (max. 8 digits)
↑,↓, (Y/N) num
ber
max. 8 digits
N
-
If the store computer is connected to a telephone system that has automatic outside line access,
specify YES for Store Computer PBX and leave the entry for the outside line access number blank.
The Service Center and Fault Service can also be configured as in-house destinations, which re
quires N to be entered before the telephone number.
If the remote station is an analog station and standard dial-up with the Blatzheim BM 33k6 ISDN pro
modem does not work, the modem can be made to perform analog dialing by entering the character
”=” before the telephone number of the alarm reporting destination:
Examples: =06117103
N=7103
S Screen 6-1-4-3 Serv. Centr Pres. (hours during which Service Center is present)
This screen is used to define the duty hours of the Service Center (hours during which Service Center is at
tended). Use the up and down cursor keys to select the separate parameters (↑) (↓).
SERVICE CENTR PRES. Entry Default
Mo-Fr 08:00 20:00
Sa 08:00 Sa 14:00
-------- --------
Service Center duty hours ↑, ↓
(Mo-Su,Mo-Fr
Mo-Sa,Sa-Su,
------, Mo, Th,
We, Th, Fr,
Sa, Su)
----
1: --.--.--
2: --.--.--
...
30: --.--.--
1 to 30 special days (dd.mm.yy),
on which Service Center is NOT attended:
↑, ↓
Numbers
----
If no times are entered, the Service Center will be considered permanently unattended.
To Next Page
Loading...