Menu structure of CI 3000
83
Version 2.09 09. April 2014
S Screen 6-1-4-4 Destination 1 Control centre as primary destination (LDSWin PC)
6-1-4-5 Destination 2 Fault clearing service as primary destination or
alternative destination for control centre (LDSWin PC)
6-1-4-6 Destination 3 SMS via the service provider AnnyWay
6-1-4-7 Destination 4 Voice message
As the configuration of all EASY alarm destinations is identical
the following explanation is based on the example of ”Destination 1” (screen 6-1-4-4).
NOTE: EASY mode only supports the priorities 1 and 2.
DEST1 SRVCCENTR Entry Default
Priority --,1,2, 1+2 -
Typ LDSW Type of alarm destination, cannot be edited
Phone Numbers
1234567890123456789
Telephone number of the alarm destination Ziffern
max. 19 Stel
len
-
Serv. Centr xxxxx - Never deactivated
- Always: No regard for the time period
- out of: outside the time period
- during during the time period
never, al
ways, out of,
during
-
With SMS message transmission the telephone number of the SMS provider must be activated in
the telephone system otherwise no SMS transmission is possible:
D1: 0171-20 92 522 0171-25 21 002
D2: 0172-22 78 020
Anny Way: 0900-32 66 90 02
When using the Voice message fault report destination, the CI 3000 Store Computer calls a tone-
dial telephone and plays a prerecorded voice message that has previously been saved to the
CI 3000 Store Computer with the LDSWin software. The party receiving the call MUST acknowledge
receipt of the voice message by pressing the 5 key.
The Voice message operating is not supportet from all modems, see chapter 5.3.
To Next Page
Loading...