Ecotech WinAQMS - Page 25

WinAQMS Mini DAS User manual 1.0 General Information
15
The table below shows the user levels in WinAQMS Mini DAS and what operations
the level is permitted to perform. This lowest level is 0 and each higher level is
permitted to do everything the previous level could in addition to what is listed in the
table.
User
Level
Security level description
0
No access to menu structure or buttons except the Security and Remote
Logger menu. Can view windows that open on startup but not move
them or change settings.
10
Can access any item in the View menu and move the windows around.
No settings can be changed.
20
Can open View menu windows and change the setting of the windows.
30
Can access the Edit menu items for viewing but cannot change any
settings.
40
Can Add/Edit logs, set precision values and set a channel out of service.
Can also access and use all Manual menu items.
50
Can change settings in the Edit menu, but not add or remove
channels/analysers.
60
Can add or remove channels/analysers.
70
Can add/remove other users and their passwords. Can also enable/disable
security.
The default user access level is 70 and the username and password for
WinAQMS Mini DAS is:
Username: WinAQMS Mini DAS
Password: ecotech