H50/H51 Hematology Analyzer User Manual Service
- 47 -
13.5.1.2 Units
Press Units to enter into Units Screen as the following two screens show. There are seven units
system. Users can select one unit system from the dropdown menu in accordance with actual
needs.
NOTE:
The difference between SI and SI MODE is that “g” is used in SI unit system while
“mmol” is used in SI MODE unit system.
13.5.1.3 CBC Thresholds and Flags
CBC Thresholds and Flags Screen
Press CBC Thresholds and Flags to enter into
the CBC Thresholds and Flags Screen.
Factory Setting to r
s.
recommended not
to edit the default values
for any changes can affect the instrument’s
performance and morphological alarms
mechanism
.
Only technical persons are allowed
to edit values on this screen.
Please refer to Section 1
2
.3 in this manual for
more details.
To Next Page
Loading...
