EDAN X8 - Setting CO Waveform

Patient Monitor User Manual Monitoring CO
2
- 104 -
WARNING
Safety and effectiveness of the respiration measurement method in the detection of apnea,
particularly the apnea of prematurity and apnea of infancy, has not been established.
15.6 Setting CO
2
Waveform
Open the menu CO
2
Waveform Setup by clicking on the CO
2
waveform area:
 Choose Mode and set it to Curve or Filled from the pop-up list;
 Choose Sweep and select a suitable setting from the pop-up list. The bigger the value is, the
wider the waveform will be.