EDAN X8 - Page 141

Patient Monitor User Manual Printing Patient Reports
- 128 -
Report Type
Procedure
12-lead analysis waveform
report
In the 12-Lead Diagnosis Waveform Review window,
click Print to start printing.
Drug calculation titration report
In the Titration window, click Print to start printing.
Oxygenation calculation report
In the Oxygenation window, click Print to start printing.
Ventilation calculation report
In the Ventilation window, click Print to start printing.
Renal function calculation
report
In the Renal Function window, click Print to start
printing.
C.O. measurement report
In the C.O. Measure window, click Print to start printing.
Hemodynamics report
In the Hemodynamics window, click Print to start
printing.
To stop the current print job, click Stop Printing in the windows mentioned above.
NOTE:
You can only start one print job at a time. Before starting a new print job, you have to stop
the current print job or wait until the current print job is completed.