How to Use This Guide
– 8 –
Added Target Wake Time, see “Physical Radio Settings” on page 64
Added HTTPS captive portal, see “Captive Portal Settings” on page 55
Added HTTPS certificate upload, see “Upload Certificate” on page 86
December 2021 Revision
This is the fourth revision of this guide. It is valid for software release v11.4.0 and
includes the following changes:
Updated QR code onboarding, see “QR Code Onboarding” on page 26
Added mesh traffic graph to the dashboard, see “Traffic Graphs” on page 39
Added MSP mode, see “System Settings” on page 81
November 2021 Revision
This is the third revision of this guide. It is valid for software release v11.3.1 and
i
ncludes the following changes:
Updated the Setup Wizard, see “AP Setup Wizard” on page 21
Updated the Dashboard, see “Status Information” on page 32
Added Smart Isolation, see “LAN Settings” on page 48
Added Hotspot Settings, see “Hotspot Settings” on page 52
Updated wireless network settings, see “Wireless Networks — Network
Settings” on page 74
Updated wireless open mesh settings, see “Wireless Networks — Open Mesh
Settings” on page 76
Added Telnet settings, see “Telnet” on page 88
Added web server settings, see “Web Server” on page 89
Added multicast DNS, see “Multicast DNS” on page 93
Added firewall settings, see “Firewall Rules” on page 50
Added a guest network, see “LAN Settings” on page 48
July 2021 Revision
This is the second revision of this guide. It is valid for software release v11.2.0 and
includes the following changes:
To Next Page
Loading...
Need help?
General
