C
HAPTER
35
| VLAN Commands
GVRP and Bridge Extension Commands
– 1121 –
COMMAND MODE
Interface Configuration (Ethernet, Port Channel)
COMMAND USAGE
GVRP cannot be enabled for ports set to Access mode using the switchport
mode command.
EXAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#switchport gvrp
Console(config-if)#
show bridge-ext This command shows the configuration for bridge extension commands.
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
COMMAND USAGE
See "Displaying Bridge Extension Capabilities" on page 123 for a
description of the displayed items.
EXAMPLE
Console#show bridge-ext
Maximum Supported VLAN Numbers : 4094
Maximum Supported VLAN ID : 4094
Extended Multicast Filtering Services : No
Static Entry Individual Port : Yes
VLAN Learning : IVL
Configurable PVID Tagging : Yes
Local VLAN Capable : No
Traffic Classes : Enabled
Global GVRP Status : Disabled
GMRP : Disabled
Console#
show garp timer This command shows the GARP timers for the selected interface.
SYNTAX
show garp timer [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
To Next Page
Loading...
Need help?
General
