C
HAPTER
24
| General Security Measures
Network Access (MAC Address Authentication)
– 883 –
show
network-access
Use this command to display the MAC authentication settings for port
interfaces.
SYNTAX
show network-access [interface interface]
interface - Specifies a port interface.
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
DEFAULT SETTING
Displays the settings for all interfaces.
COMMAND MODE
Privileged Exec
EXAMPLE
Console#show network-access interface ethernet 1/1
Global secure port information
Reauthentication Time : 1800
MAC Address Aging : Disabled
Port : 1/1
MAC Authentication : Disabled
MAC Authentication Intrusion Action : Block traffic
MAC Authentication Maximum MAC Counts : 1024
Maximum MAC Counts : 1024
Dynamic VLAN Assignment : Enabled
Dynamic QoS Assignment : Disabled
MAC Filter ID : Disabled
Guest VLAN : Disabled
Link Detection : Disabled
Detection Mode : Link-down
Detection Action : Trap
Console#
To Next Page
Loading...
Need help?
General
