C
HAPTER
13
| Security Measures
Network Access (MAC Address Authentication)
– 336 –
DISPLAYING SECURE
MAC ADDRESS
INFORMATION
Use the Security > Network Access (Show Information) page to display the
authenticated MAC addresses stored in the secure MAC address table.
Information on the secure MAC entries can be displayed and selected
entries can be removed from the table.
CLI REFERENCES
â—† "Network Access (MAC Address Authentication)" on page 871
PARAMETERS
These parameters are displayed:
◆ Query By – Specifies parameters to use in the MAC address query.
â–
Sort Key – Sorts the information displayed based on MAC address,
port interface, or attribute.
â–
MAC Address – Specifies a specific MAC address.
â–
Interface – Specifies a port interface.
â–
Attribute – Displays static or dynamic addresses.
â—† Authenticated MAC Address List
â–
MAC Address – The authenticated MAC address.
â–
Interface – The port interface associated with a secure MAC
address.
â–
RADIUS Server – The IP address of the RADIUS server that
authenticated the MAC address.
â–
Time – The time when the MAC address was last authenticated.
â–
Attribute – Indicates a static or dynamic address.
WEB INTERFACE
To display the authenticated MAC addresses stored in the secure MAC
address table:
1. Click Security, Network Access.
2. Select Show Information from the Step list.
3. Use the sort key to display addresses based MAC address, interface, or
attribute.
4. Restrict the displayed addresses by entering a specific address in the
MAC Address field, specifying a port in the Interface field, or setting the
address type to static or dynamic in the Attribute field.
5. Click Query.
To Next Page
Loading...
Need help?
General
