C
HAPTER
14
| Basic Administration Protocols
Link Layer Discovery Protocol
– 432 –
◆ Port/Trunk ID Type – There are several ways in which a port may be
identified. A port ID subtype is used to indicate how the port is being
referenced in the Port ID TLV.
◆ Port/Trunk ID – A string that contains the specific identifier for the
local interface based on interface subtype used by this switch.
◆ Port/Trunk Description – A string that indicates the port or trunk
description. If RFC 2863 is implemented, the ifDescr object should be
used for this field.
◆ MED Capability – The supported set of capabilities that define the
primary function(s) of the interface:
â–
LLDP-MED Capabilities
â–
Network Policy
â–
Location Identification
â–
Extended Power via MDI – PSE
â–
Extended Power via MDI – PD
â–
Inventory
WEB INTERFACE
To display LLDP information for the local device:
1. Click Administration, LLDP.
2. Select Show Local Device Information from the Step list.
3. Select General, Port, Port Details, Trunk, or Trunk Details.
Table 28: Port ID Subtype
ID Basis Reference
Interface alias IfAlias (IETF RFC 2863)
Port component EntPhysicalAlias when entPhysicalClass has a value ‘port(10)’ or
‘backplane(4)’ (IETF RFC 4133)
MAC address MAC address (IEEE Std 802-2001)
Network address networkAddress
Interface name ifName (IETF RFC 2863)
Agent circuit ID agent circuit ID (IETF RFC 3046)
Locally assigned locally assigned
To Next Page
Loading...
Need help?
General
