C
HAPTER
38
| Multicast Filtering Commands
MVR for IPv4
– 1258 –
clear mrv groups
dynamic
This command clears multicast group information dynamically learned
through MRV.
SYNTAX
clear mrv groups dynamic
COMMAND MODE
Privileged Exec
COMMAND USAGE
This command only clears entries learned though MRV. Statically
configured multicast address are not cleared.
Example
Console#clear mrv groups dynamic
Console#
clear mrv statistics This command clears MRV statistics.
SYNTAX
clear mrv statistics [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
vlan vlan-id - VLAN identifier (Range: 1-4094)
COMMAND MODE
Privileged Exec
EXAMPLE
Console#clear ip igmp snooping statistics
Console#
show mvr This command shows information about MVR domain settings, including
MVR operational status, the multicast VLAN, the current number of group
addresses, and the upstream source IP address.
SYNTAX
show mvr [domain domain-id]
domain-id - An independent multicast domain. (Range: 1-5)
To Next Page
Loading...
Need help?
General
