C
HAPTER
13
| Security Measures
Configuring the Secure Shell
– 344 –
◆ Version – The Secure Shell version number. Version 2.0 is displayed,
but the switch supports management access via either SSH Version 1.5
or 2.0 clients.
◆ Authentication Timeout – Specifies the time interval in seconds that
the SSH server waits for a response from a client during an
authentication attempt. (Range: 1-120 seconds; Default: 120 seconds)
◆ Authentication Retries – Specifies the number of authentication
attempts that a client is allowed before authentication fails and the
client has to restart the authentication process. (Range: 1-5 times;
Default: 3)
◆ Server-Key Size – Specifies the SSH server key size.
(Range: 512-896 bits; Default:768)
â–
The server key is a private key that is never shared outside the
switch.
â–
The host key is shared with the SSH client, and is fixed at 1024 bits.
WEB INTERFACE
To configure the SSH server:
1. Click Security, SSH.
2. Select Configure Global from the Step list.
3. Enable the SSH server.
4. Adjust the authentication parameters as required.
5. Click Apply.
Figure 180: Configuring the SSH Server
To Next Page
Loading...
Need help?
General
