C
HAPTER
13
| Security Measures
Configuring 802.1X Port Authentication
– 390 –
WEB INTERFACE
To configure port authenticator settings for 802.1X:
1. Click Security, Port Authentication.
2. Select Configure Interface from the Step list.
3. Click Authenticator.
4. Modify the authentication settings for each port as required.
5. Click Apply
Figure 212: Configuring Interface Settings for 802.1X Port Authenticator
CONFIGURING
PORT SUPPLICANT
SETTINGS FOR 802.1X
Use the Security > Port Authentication (Configure Interface – Supplicant)
page to configure 802.1X port settings for supplicant requests issued from
a port to an authenticator on another device. When 802.1X is enabled and
the control mode is set to Force-Authorized (see "Configuring
Port Authenticator Settings for 802.1X" on page 386), you need to
configure the parameters for the client supplicant process if the client must
be authenticated through another device in the network.
CLI REFERENCES
â—† "802.1X Port Authentication" on page 840
To Next Page
Loading...
Need help?
General
