C
HAPTER
14
| Basic Administration Protocols
Link Layer Discovery Protocol
– 427 –
â–
VLAN ID – The port’s default VLAN identifier (PVID) indicates the
VLAN with which untagged or priority-tagged frames are associated
(see "IEEE 802.1Q VLANs" on page 195).
â–
VLAN Name – The name of all VLANs to which this interface has
been assigned (see "IEEE 802.1Q VLANs" on page 195.
â–
Port and Protocol VLAN ID – The port-based protocol VLANs
configured on this interface (see "Protocol VLANs" on page 216).
◆ 802.3 Organizationally Specific TLVs – Configures IEEE 802.3
information included in the TLV field of advertised messages.
â–
Link Aggregation – The link aggregation capabilities, aggregation
status of the link, and the IEEE 802.3 aggregated port identifier if
this interface is currently a link aggregation member.
â–
Max Frame Size – The maximum frame size. (See "Configuring
Support for Jumbo Frames" on page 122 for information on
configuring the maximum frame size for this switch
â–
MAC/PHY Configuration/Status – The MAC/PHY configuration
and status which includes information about auto-negotiation
support/capabilities, and operational Multistation Access Unit (MAU)
type.
◆ MED TLVs – Configures general information included in the MED TLV
field of advertised messages.
â–
Capabilities – This option advertises LLDP-MED TLV capabilities,
allowing Media Endpoint and Connectivity Devices to efficiently
discover which LLDP-MED related TLVs are supported on the switch.
â–
Inventory – This option advertises device details useful for
inventory management, such as manufacturer, model, software
version and other pertinent information.
â–
Location – This option advertises location identification details.
â–
Network Policy – This option advertises network policy
configuration information, aiding in the discovery and diagnosis of
VLAN configuration mismatches on a port. Improper network policy
configurations frequently result in voice quality degradation or
complete service disruption.
◆ MED-Location Civic Address – Configures information for the
location of the attached device included in the MED TLV field of
advertised messages, including the country and the device type.
â–
Country – The two-letter ISO 3166 country code in capital ASCII
letters. (Example: DK, DE or US)