A
BOUT
T
HIS
G
UIDE
– 6 –
REVISION HISTORY This section summarizes the changes in each revision of this guide.
DECEMBER 2013 REVISION
This is the fourth version of this guide. This guide is valid for software
release v1.4.0.0. It includes information on the following changes:
â—† Updated information on the length of cable which can be accurately
tested with cable diagnostics under "Performing Cable Diagnostics" on
page 170 and "test cable-diagnostics" on page 990.
DECEMBER 2013 REVISION
This is the third version of this guide. This guide is valid for software
release v1.4.0.0. It includes information on the following changes:
â—† Updated range for parameters under "Resetting the System" on
page 146.
â—† Removed symmetric parameter under "Configuring by Port List" on
page 152.
â—† Added "Displaying Transceiver Data" on page 166 and "Configuring
Transceiver Thresholds" on page 167.
â—† Added "Configuring Load Balancing" on page 185.
â—† Added "Configuring MAC Address Learning" on page 227.
â—† Updated Table 31, "Supported Notification Messages," on page 453.
â—† Added information for Command Usage under Tabl e , " Swi tc h
Clustering," on page 482.
â—† Added new parameters under "Using the Trace Route Function" on
page 561.
â—† Updated range of Forwarding Priority under "Configuring IGMP
Snooping and Query Parameters" on page 608.
â—† Updated parameter list under "Specifying Static Interfaces for a
Multicast Router" on page 612.
â—† Added Multicast Data Drop parameter under "Filtering IGMP Query
Packets and Multicast Data" on page 621.
â—† Updated range of Forwarding Priority under "Configuring MVR Domain
Settings" on page 644.
â—† Added "mac-learning" on page 866.
â—† Added "port security mac-address-as-permanent" on page 869.
â—† Added "ip dhcp snooping limit rate" on page 896.
â—† Added "clear ip dhcp snooping database flash" on page 900.
To Next Page
Loading...
Need help?
General
